Hydrostatic Cylinder Testing

Scuba Cylinder Testing

Frog Dive have been testing diving cylinders since 1986. Our test station is Australian Standards approved #128b.

According to Australian standards all scuba cylinders must be tested annually. If your tank is out of test it will not be filled by scuba shops. Sometimes your tank may also require brushing, rumbling, etc. In order to keep your tank in good condition and minimize testing costs you should only fill your tank at a trusted shop.

Cylinder valves are not serviced in the annual cylinder hydrostatic inspection and usually needs servicing about every two years. If you use your equipment often (approx. 100 dives per year), you may want to have to have it serviced every 12 months.

Scuba Cylinder O2 Cleaning

Is your cylinder a Nitrox cylinder? Do you know that if at any point you get it filled using standard air you will have compromised your cylinder’s Nitrox status?

If that is the case or perhaps that you have purchased a cylinder that you need to use as a Nitrox cylinder, drop it into us. We will have the cylinder washed to remove any traces of hydrocarbons, as well as fully servicing, over-hauling, and replacing all the o-rings of the valve with Nitrox compatible o-rings.

To guarantee that you have your cylinder filled with Nitrox compatible (clean air) make sure that you have it filled at Frog Dive.

Cylinder Testing Information – What happens to your cylinder when you drop it off at Frog Dive for its annual test.

Sustained Load Cracking in Aluminium Cylinders – More information regarding sustained load cracking in aluminium cylinders.

Aluminium Scuba Cylinder Safety Alert
Important information click here….